StatusAOS Active
Neural Matrix 1.0
Skip to Content
NiyamX
NIYAMX

Brick & Block.

Calculate the precise quantity of bricks, blocks, cement, and sand required for any masonry project using IS 1077 and IS 2185 standards.

Wall Parameters

Length (m)
Height (m)
Thickness
Openings (sqm)

Masonry Bond Analysis

2942 UNITS
Standard IS Bond
190x90mm
₹29,756

Estimated Material Valuation

Cement
9 BAGS
Sand
56 CFT
Total Bricks
2,942

Compliance Audit

IS 1077 Modular Standards

1:6 Lean Mortar Assumptions

Need a full Masonry BOQ?

Download itemized estimation with current DSR rates.

Institutional Documentation Hub

What is Brick & Block Quantifier (IS 1077)?

Calculate the precise quantity of bricks, blocks, cement, and sand required for any masonry project using IS 1077 and IS 2185 standards.

Standard Brick Dimensions (India)

In India, brick sizes are standardized by the Bureau of Indian Standards (BIS). The most common format is the Modular Brick.

Modular (IS 1077)

Standard sizing for modern projects.

190 × 90 × 90 mm

APPROX 500 UNITS PER CUM

Traditional (Non-Modular)

Common in legacy residential builds.

230 × 110 × 75 mm

APPROX 450 UNITS PER CUM

Calculation Methodology & Wastage

The calculation follows the Volume Method. We calculate the total volume of the masonry and divide it by the volume of a single brick (including a 10mm mortar joint).

Total Volume (V)L × H × T
Mortar Volume25% to 30% of Total V
Standard wastage5.0% (Bank Standard)

Institutional Tip: Always include 10% wastage for AAC blocks due to brittle edges and site-cutting requirements.

Scaling Beyond Just Brick & Block Quantifier (IS 1077)

NIYAMX CO-PILOT
POWERED BY AI.

Our professional platform helps you generate code-compliant reports, verify thousands of municipal bylaws, and automate your entire AEC documentation workflow.

START 14-DAY FREE TRIAL
PLATFORM CAPABILITIES

Code Intelligence

Instant citations from NBC 2016 & State DCRs

Plan Verification

Automated checks for architectural layouts

Export Instruments

Professional PDF & DXF report generation

Version Control

Track code changes and city-wise updates

Trusted by 5,000+ Architects & Developers Across India

How to Estimate Brickwork Materials

Official AEC methodology for structural estimation and bill of quantities.

1

Analyze Wall Dimensions

Measure the total length and clear height of each wall segment. Ensure you account for structural columns which should be deducted.
2

Identify Unit Type

Select your project's specific unit (Modular, Traditional, or blocks). This drastically changes the unit-per-volume ratio.
3

Add Deduction Areas

Sum up the area of doors, windows, and ventilators. Enter these in 'Openings' to prevent over-ordering.
4

Calculate Resource Forecast

Review the automatically generated cement and sand totals. For large projects, we recommend rounding up to the nearest truckload.

Technical FAQ & Regulatory Compliance

1
What is the standard number of bricks per cubic meter (m³)?

For standard Modular Bricks (190x90x90 mm), approximately 500 bricks are required per cubic meter, accounting for 10mm mortar joints. For traditional bricks (230x110x75 mm), the requirement is approximately 450-480 bricks.

2
How much cement and sand is needed for 1:6 mortar mix?

For a 1:6 mix (1 part cement, 6 parts sand), you typically require 1.25 bags of cement and 7.5 cubic feet (cft) of sand per cubic meter of brickwork. This assumes a standard mortar volume of 25-30%.

3
Does this calculator handle AAC Blocks?

Yes. By selecting "AAC Block" from the menu, the calculator adjusts the unit dimensions (600x200x200 mm) and applies specialized adhesive volume requirements instead of traditional sand-cement mortar.

4
Are openings like windows and doors deducted automatically?

Yes. You can add specific opening areas (in square meters) for each wall segment. The calculator deducts these areas before calculating the final volume to ensure accuracy.

5
What is the difference between 4.5" and 9" walls in calculation?

A 9" wall (230mm) is a "Full Brick" wall, while a 4.5" wall (115mm) is a "Half Brick" wall. The calculator uses these thicknesses to determine volume. Note that half-brick walls often require more careful alignment and slightly more mortar per unit area.

6
Should I add wastage for breakage?

NiyamX recommends a 5% wastage factor for standard bricks and 10% for high-porosity or AAC blocks. This is included in our default resource forecast.
RECOMMENDED INSTRUMENTS

Related Free Tools

Concrete Mix

OPEN CALCULATOR

Steel Weight

OPEN CALCULATOR

Mortar Master

OPEN CALCULATOR

Material Estimator

OPEN CALCULATOR

Need specific municipal DCR data?

Get real-time updates for 100+ cities in India with NiyamX Enterprise.

Contact Sales
NiyamX provides informational estimates only. All compliance verification results must be verified by a licensed professional before use. NiyamX is not liable for decisions based on this output.
NiyamX

India's Official AI-Powered Building Code Platform

Search NBC 2016 · State DCRs · 500+ Municipal Bylaws · Professional AEC Compliance · Free Engineering Tools

Initializing AEC Intelligence...

Unified Building Code Infrastructure

NiyamX is India's leading AI-powered Building Code Compliance Platform designed for architects, structural engineers, and urban planners. It serves as a unified digital infrastructure for navigating the National Building Code (NBC) 2016 and 500+ municipal bylaws across India.

By leveraging advanced semantic intelligence, NiyamX accelerates building permit approvals through high-precision compliance auditing against State DCRs, RERA regulations, and Indian Standards (IS Codes).

Regulatory Intelligence & Citations

Every answer provided by the NiyamX compliance engine is cited directly from official Gazette notifications, IS standards, and the NBC 2016 repository. This ensures 100% legal defensibility for technical AEC decisions.